Skip to content
Read full notice

The Calculators House tools are for illustration only. Results are estimates, not financial, tax, medical or legal advice. Statutory rates change; verify figures with a qualified professional before acting on them.

Engineering

Ohm's Law Calculator

Solve voltage, current, resistance and power from a valid pair for a simple resistive circuit.

Your inputs

Your inputs

What you know

Range: 0 to 10,000; up to 5 integer digits and 6 decimal places. Use at most 15 digits in total.

Range: 0.0001 to 10,000; up to 5 integer digits and 6 decimal places. Use at most 15 digits in total.

Results

Result

1.4400

W
Voltage
12.0000 (V)
Current
0.1200 (A)
Resistance
100.0000 (Ω)
  • This models a steady resistive circuit using V = IR and P = VI. It does not calculate AC impedance, phase or power factor, motor behaviour or an LED current–voltage curve. Enter volts, amperes, ohms and watts, not milli-units.

This link includes your calculator inputs. Share it only with people or services you trust.

How is this calculated?

Ohm's law is V = I × R: voltage is current times resistance. Power adds one more relation, P = V × I, and every other formula you have seen is a rearrangement of those two.

For a consistent positive pair, the two equations determine the remaining magnitudes. For example, P = 1.44 W and R = 100 Ω give I = √(P/R) = 0.12 A and V = 12 V. Zero or degenerate pairs may not determine every quantity; a missing result is not evidence of a safe circuit.

Worked examples

These are the tool’s initial inputs for United States, using model version 2. The results below are calculated from those inputs; they are an illustration, not a personal recommendation.

Inputs

What you know
Voltage and resistance
First value
12
Second value
100

Results

Result
1.4400 (W)
Voltage
12.0000 (V)
Current
0.1200 (A)
Resistance
100.0000 (Ω)

This models a steady resistive circuit using V = IR and P = VI. It does not calculate AC impedance, phase or power factor, motor behaviour or an LED current–voltage curve. Enter volts, amperes, ohms and watts, not milli-units.

Change one input at a time and compare the result. Rounding can make displayed totals differ slightly; formulas use the underlying numbers.

Check the units and the geometry before using the result. Material estimates are not structural or electrical safety assessments; site measurements and supplier specifications still matter.

Frequently asked questions

Why does my LED need a resistor?

An LED needs suitable current limiting; a resistor is one method for a simple DC circuit. Use the voltage across that resistor, not the full supply: R = (supply voltage − LED forward-voltage sum) / target current. For 5 V, one 2 V LED and 0.01 A, R = 300 Ω and resistor power is 0.03 W. Check the LED data sheet, tolerances and a suitably rated resistor; this solver does not model the LED or choose a component.

Which is dangerous, voltage or current?

Current does the harm, but voltage is what drives it through your body's resistance. Neither figure is safe to reason about casually — treat mains wiring as work for a qualified electrician.

Related calculators

View all

Ready to start calculating?

Free tools with no sign-up. Calculations run on your device; shared links include your inputs.

Explore all calculators