Skip to content
Read full notice

The Calculators House tools are for illustration only. Results are estimates, not financial, tax, medical or legal advice. Statutory rates change; verify figures with a qualified professional before acting on them.

Construction

Tile Calculator

Tiles and boxes needed for a floor or wall, including cutting waste.

Units default to what is used in United States. You can switch them below.

Your inputs

Country

Sets the units and number formatting used below.

Changing country resets the inputs to match its rules or units.

Your inputs

Range: 0.1 to 100; up to 3 integer digits and 6 decimal places. Use at most 15 digits in total.

Range: 0.1 to 100; up to 3 integer digits and 6 decimal places. Use at most 15 digits in total.

In the same units as the area — a 60 cm tile is 0.6 m.

Range: 0.01 to 5; up to 1 integer digits and 6 decimal places. Use at most 15 digits in total.

Range: 0.01 to 5; up to 1 integer digits and 6 decimal places. Use at most 15 digits in total.

%
0%30%

Enter a project-specific percentage for cuts and breakages. The 10% preset is illustrative, not a guarantee for any layout.

Range: 0 to 30; up to 2 integer digits and 2 decimal places. Use at most 15 digits in total.

0100

Range: 0 to 100; up to 3 integer digits and 0 decimal places. Use at most 15 digits in total.

Results

Tiles needed

36

Boxes needed
6
Area to cover
130.00 (square units)
Tiles before waste
33
  • Check actual package coverage, joint spacing, cuts and layout with the supplier. No universal waste percentage is prescribed; use matching units and project measurements.

This link includes your calculator inputs. Share it only with people or services you trust.

How is this calculated?

Worked examples

Illustration in meters: 4 × 3 = 12 m²; a 0.3 × 0.3 tile covers 0.09 m². At an assumed 10% waste, ceil(12 / 0.09 × 1.10) = 147 tiles; eight per box gives 19 boxes. Measured area, waste-adjusted tiles and whole boxes are different quantities. Check actual package coverage, joint spacing, cuts and layout with the supplier. No universal waste percentage is prescribed; use matching units and project measurements.

Worked examples

These are the tool’s initial inputs for United States, using model version 1. The results below are calculated from those inputs; they are an illustration, not a personal recommendation.

Inputs

Area length
13
Area width
10
Tile length
2
Tile width
2
Waste allowance
10.00%
Tiles per box
6

Results

Tiles needed
36
Boxes needed
6
Area to cover
130.00 (square units)
Tiles before waste
33

Check actual package coverage, joint spacing, cuts and layout with the supplier. No universal waste percentage is prescribed; use matching units and project measurements.

Change one input at a time and compare the result. Rounding can make displayed totals differ slightly; formulas use the underlying numbers.

Check the units and the geometry before using the result. Material estimates are not structural or electrical safety assessments; site measurements and supplier specifications still matter.

Frequently asked questions

Does grout spacing change the count?

Joint spacing affects the covered area, but this model uses tile area without laying out joints or cuts. Check the planned grid and package coverage; the waste percentage does not prove that joint spacing can be ignored.

How much waste should I allow?

Choose an allowance from the actual layout, tile size, cuts and breakage risk. Check whole-box quantities and supplier coverage before ordering. The preset is an example rather than a universal recommendation.

Related calculators

View all

Ready to start calculating?

Free tools with no sign-up. Calculations run on your device; shared links include your inputs.

Explore all calculators